Overview

  • 1,000 gal (3800L) tank
  • Direct injection product mixing option
  • Dry spinner compatibility increases versatility

Features

Faster spray and transport speed allow operators to get to the field sooner
    Field speeds increased to 40 kph (25 mph)Field speeds increased to 40 kph (25 mph)
    Road speeds increased to 56 kph (35 mph)Road speeds increased to 56 kph (35 mph)

    Efficiency and productivity are key drivers to any successful application operation. To meet this need, the R4038 and R4045 have increased spray and transport speeds allowing operators to get jobs done faster and move onto the next field sooner. Operators can now travel 25 percent faster across the field, allowing them to spray more acres per day. Transport speed has also been increased by 16.5 percent, which gets operators to the next field quicker. This translates into a 40 km/h (25 mph) spray speed and 56 km/h (35 mph) road transport speed, boosting overall productivity throughout the day.

36-m (120-ft) boom with swing-link suspension eliminates additional passes through the field

    Make fewer passes through the field and reduce compaction, as well as time spent spraying, with the optional 36 m (120 ft) boom.

    All 27-m (90-ft), 30-m (100-ft), and 36-m (120-ft) booms are more stable thanks to the swing link suspension, which helps translate rough areas in the field into horizontal (side-to-side) movement of the boom rather than lateral (up and down) movement. This additional stability means increased productivity as the boom now has the ability to more accurately maintain spray height above the crop, delivering a precise spray pattern. The swing link suspension also translates into uptime as the additional stability means less crop damage, resulting in less mechanical boom damage.

    Finally, the enhanced design allows the boom to unfold and fold faster, getting the operators into the field more quickly, and the flat fold design delivers superior transport visibility.

Solution Command System (SCS) allows for automation at the fill station
    Solution Command offer push button loadingSolution Command offer push button loading
    12-button keypad and micro-display12-button keypad and micro-display

    The 4 Series Sprayers are available with the SCS and have been completely redesigned to allow for quick and easy operation at the load station for operators of all skill levels. This optional system allows for complete automation at the load station with a 12-button keypad. The features include the following:

    • Fill station light on/off
    • Pump on/off
    • Agitation
    • Pump speed increase
    • Pump speed decrease
    • Eductor on/off
    • Master on/off
    • Automated rinse cycle
    • Visual nozzle check
    • Pull-on fill
    • Push-on fill
    • Target fill

    The system also features a micro-display, which provides real-time feedback on the system operations, as well as the ability to select a rinse method and the ability to monitor progress during the automated rinse function. Overall, the enhanced Solution Command System increases operational performance by increasing ease of use through automation at the load station.

Plumbing efficiencies lead to increased application rates, additional versatility as well as faster loading times

    The John Deere 4 Series Sprayers have been designed to address the trend toward increased application rates and the desire for improved loading efficiencies. In fact, the R4030 and R4038 offer the most efficient liquid fertilizer application systems and the fastest loading times that John Deere has ever offered on this size of sprayers to date.

    The solution system has been redesigned from the ground up to streamline plumbing for maximum efficiency and flow rate. The standard-flow system (standard solution pump and single flow meter) delivers 30 percent higher flow rates than previous models, delivering up to 170 gal. of output per minute. The optional high-flow system, only offered on the R4038, comes complete with a high-flow pump and dual-flow meters, delivers up to a 60 percent increase from previous models, equating to approximately 225 gal. of output per minute.

    Additionally, load times using the on-board solution pump are up to 30 percent faster. This means operators can get back into the field sooner and spend less time filling. These improvements to the plumbing system all link to enhanced versatility and productivity for operators as they strive to increase the effectiveness of their application passes and drive towards increased yields year over year.

ExactApply™ nozzle control increases precision application to maximize yield potential
    John Deere ExactApply nozzle control
    ExactApply nozzle controlExactApply nozzle control

    With ExactApply nozzle control, sprayer operators will see an increase in productivity and spray speed ranges, will be able to better manage drift, and will have improved spray quality and precision.

    ExactApply offers operators:

    • Individual nozzle control
    • Pulse-width modulation of 15 and 30 Hz
    • Wider speed range while maintaining target rate and pressure
    • Turn compensation
    • Light-emitting diode (LED) lighting
    • Nozzle switching (automatic/manual)
    • Ability to apply liquid nitrogen at wider range of speeds
    • Air induction nozzle compatibility
    • Programmable rates by nozzle/selection (for example, a higher rate behind rear tires)
    • Key fob for nozzle diagnostics
    • Solenoid fault detection

    NOTE: ExactApply will be available as a factory-installed option on model year 2018 R4030, R4038, and R4045 Sprayers with stainless-steel plumbing and 38.1- or 50.8-cm (15- or 20-in.) nozzle spacing.

     

Smooth, stable ride enables operator comfort and better maneuverability

    Machine performance and operator comfort are requirements during long days of operation. The field-proven dual strut independent wheel air-ride suspension reduces overall machine maintenance. This suspension also provides a best-in-class ride, which is expected from John Deere Sprayers, even in the roughest fields.

    Additionally, approximately 9 percent of the machine weight has been transferred to the front axle of the R4030 and R4038, which leads to improved balance and further increases machine maneuverability. These features lead to less operator adjustment in the field and on the road. At the end of the day, a smooth, stable ride allows the operator the ability to travel faster across the field and cover more acres, leading to increased productivity.

CommandView™ III cab offers unsurpassed amenities
    4 Series Sprayer operator station4 Series Sprayer operator station

    When operators first enter the Command View III cab, they will notice that significant changes have been made. Key sprayer controls are more easily accessible to the operator on the redesigned CommandARM™ control panel and the multifunction handle has a more ergonomic fit and feel.

    The multifunction handle has six reconfigurable buttons, a scroll to select speed range, and allows operators to better manage their headlands with the Headland Management System (HMS™) button. To finish out the upgrades, the GreenStar™ display has been upgraded to a faster, more user-friendly 4600 CommandCenter™ display, which allows operators to efficiently capture, manage, and transfer data.

    Comfort continues to be enhanced by the ComfortCommand™ seat, which offers both fore-aft and lateral attenuation along with 15 degrees of right-hand seat swivel on all cab options. For first-class comfort, the premium cab offers a heated/ventilated leather seat and light-emitting diode (LED) cab lights.

    The 4 Series Sprayers are JDLink™ telematics system capable, which enable features such as John Deere Wireless Data Transfer (WDT), Service ADVISOR™ Remote diagnostics, and Remote Display Access (RDA). These integrated solutions enable additional uptime and reduce cost of operation. All of the CommandView III cab features allow operators to run longer hours, increasing the ability to get more acres sprayed in a day.

Direct injection allows operators to manage their chemical risks
    Field-installed 511-L (135-gal.) direct-injection systemField-installed 511-L (135-gal.) direct-injection system
    Field-installed 889-L (235-gal.) direct-injection systemField-installed 889-L (235-gal.) direct-injection system

    As solution tank mixes become more complex, operators need a better way to manage the products they are mixing in helping to reduce the risk of chemical residue. The integrated direct-injection system provides an additional carrying capacity of up to 511 L (135 gal.) on model year 2015 and older R4030/R4038 (serial number 10,999 and lower) machines and up to 889 L (235 gal.) on the model year 2016 and newer R4030/R4038 (serial number 11,001 and higher) and all model year R4045 machines for raw chemicals and allows injection of single, dual, or triple products directly into the boom depending on installed configuration. 

    MachineCarrying capacityMaximum number of chemicals injected
    R4030/R4038 model year 2015 and older (SN 10,999 and lower)511 L (135 gal.)Two -one high volume, one low volume
    R4030/R4038 model year 2016 and newer (SN 11,000 and higher)889 L (235 gal.) Three-two high volume, one low volume
    R4045889 L (235 gal.)Three-two high volume, one low volume


    NOTE: Low-volume tanks and pumps must be configured with at least one high-volume tank and pump.  High-volume tank and pump can be configured by itself.
     

    Not only can this help provide quicker changeovers and faster cleanouts, it also helps lower the risk of using multiple chemicals. This is accomplished by allowing operators the ability to isolate higher-residual risk chemicals in the injection system while mixing lower-risk chemicals in the solution tank.

    Direct injection can help expand the versatility that an operator has throughout the day while adding additional performance and uptime as they manage the product that they are applying.

    Model year 2017 direct-injection systems (attachments BKK10302, BKK10303, BKK10304, BKK10305) will have pump rinse functionality added. Pump rinse functionality can also be added to a current direct-injection system by adding a three-way inlet valve to each DI pump. The three-way valve connects on one port to the chemical tank for normal operation (injection) and to the clean water rinse tank on the other port (for daily pump rinse).

    This feature allows for rinse water to be pulled from rinse tank, through the pump head, and out of the boom mixing chamber. This yields the following benefits:

    • Automatic rinse system, integrated with pump operating modes, cleans chemical out of pump
    • Reduce chemical residual buildup in pump
    • Improved maintenance process, while enabling product to be stored in direct-injection tanks between operation
Monitor sprayer performance in the cab
    Connect Mobile showing an actual rate map and monitoring the sprayer performanceConnect Mobile showing an actual rate map and monitoring the sprayer performance
    Connect Mobile overview

    John Deere Connect Mobile is a solution that utilizes an Apple® iPad® tablet in the cab that provides the operator a better understanding of the sprayer’s performance. Connect Mobile documents and displays several sprayer performance attributes, helping the operator monitor and more easily detect problems that can occur while spraying. Connect Mobile also has a common user interface that makes it easy to use between different pieces of John Deere equipment. Once the job is done, the iPad with the spraying data can be utilized to perform basic crop scouting activities in the field.

    Spraying attributes

    Monitor key performance indicators in map layers and dashboard tiles such as:

    • Actual rate
    • Rate deviation
    • Pressure
    • Ground speed
    • Droplet size
    • Target rate
    • Flow rate
    • Tank volume
    • Productivity
    • Fuel rate
    In base equipment

    Connect Mobile hardware is factory installed on all model year 2017 and newer R4030, R4038, and R4045 Sprayers, making it easy to get started with Connect Mobile.

     

    Learn more about Connect Mobile in the Field and Crop Solutions section within the Precision Ag Technology product line and how it can improve the quality of a spraying job.

     

    iPad and Apple are trademarks of Apple Inc.

Dry spinner spreader compatibility increases versatility by allowing the conversion of a machine with a wet solution system into a dry nutrient applicator with a 5.6-m3 (200-cu ft) carrying capacity

    At the end of the spraying season operators can keep their sprayers working for them by converting them to dry nutrient applicators with the addition of the New Leader® DN456 Dry Spinner Spreader. This conversion can be completed in as little as 4 hours and involves the removal of the wet solution skid and the installation of the dry spinner spreader.

    The DN456 features a carrying capacity of up 5.6 m3 (200 cu ft) of dry fertilizer. Capable of holding 6.6 tons of fertilizer (not approved for ag lime) with variable rate applications from 34 kg/ha (75 lb/acre) up to 3 ton/acre. The 1.83-m (72-in.) spinner heights allow spread width up to 32 m (105 ft) as it propels material across the pass. This equates to a consistent spread pattern across the field and decreased cost of operation for the 4 Series Sprayers.

    The DN456 can be ordered with either 304 stainless-steel or 409 painted spreader material, single or dual product bin configuration, with either #4 belt over chain or #5 straight belt conveyor configurations.

    New Leader is a registered trademark of Highway Equipment Company.

Specifications

Engine

  • Peak rated power 231 kW
    310 hp
  • Emissions Final Tier 4
  • Number of cylinders 6
  • Displacement 9.0 L
    549 cu in.
  • Alternator 200 amp
  • Fuel tank capacity 605.7 L
    155 gal.
  • Diesel exhaust fluid (DEF) tank capacity 29.5 L
    7.8 gal.

Solution system

  • Capacity 3800 L
    1000 gal.
  • Tank material Stainless steel
  • Rinse tank capacity 454.2 L
    120 gal.
  • Quick fill size 7.6 cm
    3 in.
  • Automatic section control John Deere Section Control (optional)
  • Solution system control Automatic (optional) or manual
  • Fill location Side fill, front fill (optional)
  • Chemical injection method Direct injection (optional)
  • Chemical eductor Stainless steel
  • Chemical eductor capacity (size) 32 L
    8.5 gal.
  • Flow meter size 5.1 cm
    2 in.
  • Suction strainer 20 mesh
  • Pressure strainer 50 mesh
  • Boom strainer 80 mesh

Boom

  • Boom length options 27.4, 30.4, or 36.5 m
    90, 100, or 120 ft
  • Automatic boom height BoomTrac Pro - 5 sensor (optional)
  • Plumbing material Stainless steel (polyethylene optional)
  • Ground height adjustment 50 to 245 cm
    19.6 to 96.5 in.
  • Breakaway width Stainless-steel boom - 3.3 m
    10.8 ft, in.
    Carbon fiber boom - 3.7 m
    12.1 ft
  • Boom sections 13 sections with boom length - 40 m
    132 ft
    11 sections with boom length - 36.58 m
    120 ft
    9 sections with boom length - 30.48 m
    100 ft
    7 sections with boom length - 27.43 m
    90 ft

Drivetrain

  • Type Hydrostatic
  • Drive Full-time four-wheel drive (4WD)
  • Shifting Electrohydraulic
  • Hydraulic reservoir capacity 98 L
    26 gal.
  • Spray speed range 0 to 40.2 km/h
    0 to 25 mph
  • Transport speed, maximum 56.3 km/h
    35 mph
    Europe only - 40 km/h
    24.9 mph

Chassis

  • Dry compatible Yes - 5.7 m3
    200 cu ft
  • Suspension Dual-strut independent wheel air-ride suspension
  • Crop clearance with standard tires 152 cm
    60 in.
  • Front tires 320/90 R46, 380/90 R46, or 420/80 R46
  • Rear tires 320/90 R46, 380/90 R46, or 420/80 R46
  • Flotation tires 520/85R38 or 620/70R38 (field installed only)
  • Hydraulic tread adjust Standard
  • Wheel tread spacing 305 to 406 cm
    120 to 160 in.
  • Wheel base 430 cm
    169.3 in.
  • Turning radius 8.7 m
    28.5 ft
  • Parking brake Spring-engaged, hydraulic-disengaged wet disk pack
  • Primary brakes Hydrostatic
  • Ladder raise/lower Automatic
  • Total weight with 90-ft boom 14,015 kg
    30,833 lb
  • Total weight with 100-ft boom 14,090 kg
    30,998 lb
  • Total weight with 120-ft boom 14,345 kg
    31,559 lb
  • Total weight with carbon fiber boom 36.6-m (120-ft) boom - 13,304 kg
    29,330 lb
    40.2-m (132-ft) boom - 13,359 kg
    29,451 lb

Options

  • Air compressor Onboard air (standard)
  • Foam marker capacity Air injection foamer - 5.7 L
    1.5 gal.

Additional information

  • Date collected 26-May-2017

Mexico

573-581-5900

Macon

660-385-2177

Rocheport

573-446-3030

Kirksville

660-665-1500

Chillicothe

660-646-5493

Palmyra

573-769-2112

Moscow Mills

636-366-9400

Curryville

573-594-6493

Tipton

660-433-5596

Hermann

573-486-3204

Dutzow

636-433-2256

SALISBURY

660-388-6166

COLUMBIA

573-476-0730

 

 
Your Partner In Growing A Better Tomorrow
ABOUT USCONTACT US | CAREERS | BLOG | SPECIALS | SITEMAP | POLICIES | DONATION REQUEST |
AG EDUCATION PARTNERSHIPS | EQUIPMENT TRANSFER REQUEST


Copyright ©2017 Sedona Technologies. All rights reserved.