Overview

  • Tool-free removal and attachment with just a few, simple steps
  • Frame design that allows for maximum maneuverability
  • Repositioned leveling links for better visibility
  • Automatic Mast Latch system for quick change from loader to three-point implements

Features

Boom lockout for easy service
    Hydraulic shut-off valve (open position)Hydraulic shut-off valve (open position)
    Hydraulic shut-off valve (closed position)Hydraulic shut-off valve (closed position)

    A hydraulic shut-off valve is included with the R-Series Ag Loaders to ensure the loader does not lower suddenly. For example, this allows the boom to be locked out when someone is required to be located under the loader boom for service work on the tractor. It should not be used for extended periods of time unless an appropriate support stand is also utilized.

Loader options to improve productivity
Single-point hydraulic connection saves time
    Single-point hydraulic connection (open)Single-point hydraulic connection (open)
    Single-point hydraulic connection (closed)Single-point hydraulic connection (closed)

    The 620R, 640R, 660R, and 680R Loaders can be ordered with a single-point hydraulic connection that also incorporates the connection point for any electrical needs. To disconnect the hydraulic connection between the loader and the tractor, it is necessary to relieve the hydraulic system oil pressure on the tractor.

Concealed oil lines improve appearance and reduce damage
    Concealed oil lines through boom arm (H-Series Loader is representative only)Concealed oil lines through boom arm (H-Series Loader is representative only)
    #
    Oil lines routed through the boom armOil lines routed through the boom arm
    Oil lines routed through the torque tubeOil lines routed through the torque tube

    Through time, increased width in tractor hoods have caused issues with available space for running traditional oil lines of a loader along the boom, making them more susceptible to damage.

     

    To improve this situation, the oil lines have been routed through the boom arm and the torque tube, improving line protection and the appearance of the loader.

False rod bucket cylinders improve productivity mechanical self-leveling (MSL) only
    False rod cylinderFalse rod cylinder
    #

    Fast bucket cycle times are important to dump the load from the bucket as quickly as possible (quite often) in order to be as productive as possible while completing loading operations. The bucket cylinder design can have a major impact on this cycle time, especially for the MSL loaders. 

     

    All MSL R-Series Loaders utilize false rod bucket cylinders. A false rod cylinder has a smaller displacement of oil requirement on the head end of the cylinder, which allows this cylinder to dump much faster than a normal cylinder.

Loader removal (parking) made easy
    Automatic mast latch systemAutomatic mast latch system
    #

    R-Series Loaders are now even easier to remove and reinstall due to an automatic mast latch system. Simply exit the tractor once for removal and once for reinstall to reduce the amount of downtime associated with loader parking.

     

    For a more detailed look at the steps, please refer to the operator’s manual.


    To remove the loader, follow these simple steps:

    • Set the bucket flat on ground, release the hydraulic pressure, and exit the tractor.
    • Set the adjustable parking stands on the ground. 
    • Flip the lock handles located on either mast to unlock the loader from the frames.

    • Disengage the hydraulic couplers and return to the tractor seat.
    • Back away from the loader.

    To reinstall the loader follow these simple steps:

    • Drive the tractor into the loader, resulting in mechanical connection (no more maneuvering the loader to fit into the frames).
    • Exit the tractor.
    • Fold up the parking stands.
    • Attach the hydraulic connection.
    • Enter the tractor and have full control of the loader.

     

Specifications

Tractor

  • Model 6175R/M, 6195R/M, 6215R
  • Front tire 600/70R28
  • Rear tire 650/85R38
  • Front axle configuration MFWD
  • Wheelbase 2800 mm
    110 in.
  • Pump capacity 114 L/min
    30.1 gpm
  • Rated pressure 200 bar
    2900 psi

Loader

  • Leveling configuration Mechanical Self Leveling (MSL)
  • Bucket used Heavy duty 2450 mm
    Heavy duty 96 in.
  • Bucket weight 375 kg
    827 lb
  • Lift capacity at full height Measured at pivot (U)
    2453 kg
    5408 lbMeasured at 800 mm ahead of pivot (V)
    2431 kg
    5359 lb
  • Lift capacity at 59 in. (1500 mm) Measured at pivot (W)
    2989 kg
    6590 lbMeasured at 800 mm ahead of pivot (X)
    2821 kg
    6219 lb
  • Boom breakout force Measured at pivot (Y)
    3411 kgf
    7520 lbfMeasured at 800 mm ahead of pivot (Z)
    3001 kgf
    6616 lbf
  • Bucket rollback force capacity At maximum height (VV)
    3117 kgf
    6872 lbfAt 59-in. (1500-mm) lift height (XX)
    4486 kgf
    9890 lbfAt ground-level line (ZZ)
    4336 kgf
    9559 lbf
  • Dimensions Maximum lift height (A)
    4480 mm
    176 in.At full height - bucket level(B)
    4240 mm
    167 in.At full height - bucket dumped (C)
    3465 mm
    136 in.
  • Overall length (I+F), ft (m) 5.5 m
    17.9 ft
  • Digging depth (H) 96 mm
    5 in.
  • Reach At maximum height (D)
    1346 mm
    53 in.At ground level - bucket level (F)
    2931 mm
    115 in.
  • Bucket angle Dump angle, degrees (E)
    60 degree (angle)Rollback angle, degrees (G)
    48 degree (angle)Dump angle, ground
    117 degree (angle)
  • Cycle times Loader raise, seconds
    4.19 secondsLoader lower, seconds
    2.89 secondsBucket dump, seconds
    1.81 secondsBucket rollback, seconds
    1.81 seconds

Mexico

573-581-5900

Macon

660-385-2177

Rocheport

573-446-3030

Kirksville

660-665-1500

Chillicothe

660-646-5493

Palmyra

573-769-2112

Moscow Mills

636-366-9400

Curryville

573-594-6493

Tipton

660-433-5596

Hermann

573-486-3204

Dutzow

636-433-2256

SALISBURY

660-388-6166

COLUMBIA

573-476-0730

 

 
Your Partner In Growing A Better Tomorrow
ABOUT USCONTACT US | CAREERS | BLOG | SPECIALS | SITEMAP | POLICIES | DONATION REQUEST |
AG EDUCATION PARTNERSHIPS | EQUIPMENT TRANSFER REQUEST


Copyright ©2017 Sedona Technologies. All rights reserved.