Overview

  • Compatible with 3R Series Tractors
  • Quik-Park™ mounting system for efficient attachment and removal
  • Quik-Change attachment carrier makes it easier and faster to move from chore to chore
  • 1,122 pounds (509 kg) lift capacity

View Product Brochure

Features

Quik-change attachment carrier
    Quik-change attachment carrierQuik-change attachment carrier

    Allows fast, easy removal/mounting of attachments without tools.

End-of-pin lubrication means easy maintenance
    Close up of grease fittingClose up of grease fitting
    Pivot point grease fitting locationsPivot point grease fitting locations

    All pivot points on the loader have grease fittings that are accessible from the side of the loader to make greasing the loader much easier, ensuring that all grease points are more likely to be serviced. No more searching for grease points that are hard to find. Removing the grease gun from the grease fitting or zerk is not a problem either as sufficient radius has been left to allow the grease gun tip to be rotated to the side for removal from the fitting or zerk.

Quik-Park™ loader mounting system
    Quik-Park loader mounting systemQuik-Park loader mounting system

    The H-Series Loaders are designed for easy removal and mounting to and from the tractor without tools.

    The parking stand, attached to the front frame of the tractor, is an integral part of the loader during loader operation.

    The parking stand lowers into position by moving the joystick to the raised position once the latches are opened. This allows the loader to move to the parked position.

    To view a video of how the Quik-Park™ system works click here.

    NOTE: This video only shows the dismount and mount of the loader without disconnecting the hydraulics. To completely remove the loader, the operator must turn the tractor off, relieve the hydraulics, and then disconnect the hoses from the couplers.

Specifications

Tractor

  • Model 3120/3320/3520/3720/3033R/3038R/3039R/3045R/3046R
  • Front tire 7.00-14 6PR R1
  • Rear tire 11.2-24 6PR R1
  • Wheelbase 1727 mm
    68 in.
  • Pump capacity 8.6 gpm
  • Rated pressure 2500 psi

Loader

  • Bucket weight 93.8 kg
    206.8 lb
  • Lift capacity at full height Measured at pivot (U)
    725 kgf
    1598 lbfMeasured at 500 mm ahead of pivot (V)
    509 kgf
    1122 lbf
  • Lift capacity at 59 in. (1500 mm) Measured at pivot (W)
    964 kgf
    2125 lbfMeasured at 500 mm ahead of pivot (X)
    748 kgf
    1649 lbf
  • Boom breakout force Measured at pivot (Y)
    1509 kgf
    3327 lbfMeasured at 500 mm ahead of pivot (Z)
    1097 kgf
    2417 lbf
  • Bucket rollback force capacity At maximum height (VV)
    811 kgf
    1787 lbfAt 59-in. (1500-mm) lift height (XX)
    1349 kgf
    2974 lbfAt ground-level line (ZZ)
    1401 kgf
    3087 lbf
  • Dimensions Maximum lift height (A)
    2593 mm
    102 in.At full height - bucket level(B)
    2388 mm
    94 in.At full height - bucket dumped (C)
    2024 mm
    79.7 in.
  • Overall length (I+F), ft (m) 3.207 m
    10.52 ft
  • Digging depth (H) 143 mm
    5.6 in.
  • Reach At maximum height (D)
    562 mm
    22.1 in.At ground level - bucket level (F)
    1489 mm
    58.6 in.
  • Bucket angle Dump angle, degrees (E)
    41.1 degree (angle)Rollback angle, degrees (G)
    31 degree (angle)
  • Cycle times Loader raise, seconds
    3.56 secondsLoader lower, seconds
    2.1 secondsBucket dump, seconds
    2.96 secondsBucket rollback, seconds
    1.75 seconds

Mexico

573-581-5900

Macon

660-385-2177

Rocheport

573-446-3030

Kirksville

660-665-1500

Chillicothe

660-646-5493

Palmyra

573-769-2112

Moscow Mills

636-366-9400

Curryville

573-594-6493

Tipton

660-433-5596

Hermann

573-486-3204

Dutzow

636-433-2256

SALISBURY

660-388-6166
Your Partner In Growing A Better Tomorrow
ABOUT USCONTACT US | CAREERS | BLOG | SPECIALS | SITEMAP | POLICIES | DONATION REQUEST |
AG EDUCATION PARTNERSHIPS | EQUIPMENT TRANSFER REQUEST


Copyright ©2017 Sedona Technologies. All rights reserved.