Overview

  • Moldboard frame pivots with the bottoms
  • Plastic moldboard and steel shins
  • Landsides with wedges
  • Front gauge wheels

View Product Brochure

Features

Moldboard frame pivots with the bottoms
Moldboard frameMoldboard frame

All 995 Moldboard Plows use only one set of bottoms.

 

The moldboards are reversed laterally by a hydraulic cylinder that is standard equipment. There are several advantages of this design over traditional two-way roll-over plows with two sets of bottoms:

  • Requires less 3-point hitch capacity
  • Requires less ballasting of the tractor front end
  • Eliminates initial cost and service requirements for one complete set of standards and bottoms

Adjust front gauge wheels to limit plowing depth
Front gauge wheelsFront gauge wheels

The front gauge wheels can be adjusted to limit the plowing depth to 356 mm (14 in.). They come equipped with 6.70-15 tires.

Rear gauge wheels come in standard equipment
995 Moldboard Plow rear gauge wheels995 Moldboard Plow rear gauge wheels
 
#

Two front and one rear gauge wheels are standard equipment on the 995 Moldboard Plow:

  • Equipped with 6.70-15 tires for good flotation
  • Easy turnbuckle adjustment on rear gauge wheel
  • Adjustable front gauge wheels limit the plowing depth to 356 mm (14 in.)

V-style mainframe distributes weight for good penetration
995 mainframe995 mainframe
 
#

The V-style mainframe of the 995 Moldboard Plow distributes weight for good penetration.

 

The mainframe is made of high-strength 178-mm x 102-mm (7-in. x 4-in.) tubing that is 8-mm (5/16-in.) thick to handle the stress of high-horsepower tractors working in tough ground conditions.

Integral on-land hitch provides excellent maneuverability
Integral on-land hitch Integral on-land hitch
 
#

The integral hitch gives unexcelled maneuverability in turns and when parking in tight areas:

  • Category 3/3N Quik-Coupler compatible
  • Tractor rockshaft lever controls the raising and lowering of the plow
    • Maximum plowing depth to 356 mm (14 in.)
  • Provides ample clearance between the tractor tires and the plow

Features

Moldboard frame pivots with the bottoms
    Moldboard frameMoldboard frame

    All 995 Moldboard Plows use only one set of bottoms.

     

    The moldboards are reversed laterally by a hydraulic cylinder that is standard equipment. There are several advantages of this design over traditional two-way roll-over plows with two sets of bottoms:

    • Requires less 3-point hitch capacity
    • Requires less ballasting of the tractor front end
    • Eliminates initial cost and service requirements for one complete set of standards and bottoms
Adjust front gauge wheels to limit plowing depth
    Front gauge wheelsFront gauge wheels

    The front gauge wheels can be adjusted to limit the plowing depth to 356 mm (14 in.). They come equipped with 6.70-15 tires.

Rear gauge wheels come in standard equipment
    995 Moldboard Plow rear gauge wheels995 Moldboard Plow rear gauge wheels
    #

    Two front and one rear gauge wheels are standard equipment on the 995 Moldboard Plow:

    • Equipped with 6.70-15 tires for good flotation
    • Easy turnbuckle adjustment on rear gauge wheel
    • Adjustable front gauge wheels limit the plowing depth to 356 mm (14 in.)
V-style mainframe distributes weight for good penetration
    995 mainframe995 mainframe
    #

    The V-style mainframe of the 995 Moldboard Plow distributes weight for good penetration.

     

    The mainframe is made of high-strength 178-mm x 102-mm (7-in. x 4-in.) tubing that is 8-mm (5/16-in.) thick to handle the stress of high-horsepower tractors working in tough ground conditions.

Integral on-land hitch provides excellent maneuverability
    Integral on-land hitch Integral on-land hitch
    #

    The integral hitch gives unexcelled maneuverability in turns and when parking in tight areas:

    • Category 3/3N Quik-Coupler compatible
    • Tractor rockshaft lever controls the raising and lowering of the plow
      • Maximum plowing depth to 356 mm (14 in.)
    • Provides ample clearance between the tractor tires and the plow

Mexico

573-581-5900

Macon

660-385-2177

Rocheport

573-446-3030

Kirksville

660-665-1500

Chillicothe

660-646-5493

Palmyra

573-769-2112

Moscow Mills

636-366-9400

Curryville

573-594-6493

Tipton

660-433-5596

Hermann

573-486-3204

Dutzow

636-433-2256

SALISBURY

660-388-6166
Your Partner In Growing A Better Tomorrow
ABOUT USCONTACT US | CAREERS | BLOG | SPECIALS | SITEMAP | POLICIES | DONATION REQUEST |
AG EDUCATION PARTNERSHIPS | EQUIPMENT TRANSFER REQUEST


Copyright ©2017 Sedona Technologies. All rights reserved.